flue pipe

英 [fluː paɪp]

美 [fluː paɪp]

网络  烟道管; 烟道; 哨管; 废烟道

英英释义

noun

• organ pipe whose tone is produced by air passing across the sharp edge of a fissure or lip
  Synonym:fluelabial pipe

双语例句

• Study on the Property Recovery and Material Selection of the Flue Gas Pipe
  催化大烟气管线性能恢复与选材的研究
• The utility model relates to a streamline flue pipe cover which is used for flue pipes and exhaust cylinders.
  一种用于烟筒和排气筒的流线型烟筒罩。
• Applying the Washing Water of Flue Gases to Wash Ash for Preventing the Pipe from Fouling
  利用烟道气洗涤水冲灰
• Treatment of high density SO_2 flue gas from smeltery using style of flue pipe desulfurizing installation
  烟道式脱硫装置处理冶炼厂高浓度SO2烟气的工程实践
• The result shows that when flue gas flow through the heat exchanger, the elbow part of pipe is easier to suffer low temperature corrosion than the straight part.
  结果显示，烟气流经换热器内部，在管子弯头处较直管段处容易出现低温腐蚀。
• Air pressure protection device: When the fan doesn't work, or the flue pipe is blocked, or the air pressure is too high, combustion will automatically stop.
  风压过大保护装置：当风机故障、烟道堵赛、风压过大时，燃烧自动停止。
• Under the condition of constant geometric parameters of heat pipe, the influence of inlet temperature of flue gas on the heat transfer coefficients of separated heat pipe exchanger is small, so the structure of separated heat pipe exchanger shall be optimized to enhance the heat transfer coefficients.
  在热管几何参数不变的情况下，烟气进口温度对分离式热管换热器的传热系数影响很小，因此为提高传热系数，应优化其结构。
• With the pipe spacing of heat exchanger entrance increases, the outlet temperature and velocity of flue gas increase. It reduces the internal corrosion and the number of pipe corrosion, but the heat is reduced.
  随着换热器内部管间距的增大，烟气出口的温度流速都有升高趋势，管子腐蚀排数减少，但这是以减少换热为代价的。
• The design of the level flue of the 1# and 2# are different greatly, The distribute of the negative pressure of the level flue is balanced by adjusting the opening angle of the papilionaceous valve of the branch of smoking pipe;
  一、二期水平烟道设计有很大不同，调节支烟管蝶阀的开启角度来平衡水平烟道负压分配；
• The equipments of regenerator, third stage cyclone etc, and flue gas pipe of catalytic cracker in the first refinery of Fushun petrochemical company, occured a great quantity of crack on the shell wall and pipe wall caused by stress corrosion.
  抚顺石化分公司石油一厂催化裂化装置再生器、三旋等设备及烟气管道，由于应力腐蚀，致使器壁和管壁产生了大量裂纹。